LANDTACK (R
SCE-TAK
Erosion Control Additives
Description: SCE-TAK Is Poly Acrylamide.
* SCE-TAK is pure white granular. It bonds fiber mulch to soil particles to prevent erosion. SCE-TAK is hydrophilic and allows water into the mulch matrix. This provides an excellent environment for seed germination and establishment.
* SCE-TAK lubricates this slurry and eliminates clogging.
* SCE-TAK is not suitable for tacking straw mulch!
Applicaton Rate: Area SCE-TAK
5,000 sq. ft. 9 oz.
10,000 Sq. ft. 18 oz.
1 Acre 3 lbs.
Dust Control Rate: 1 Acre 3 lbs.
Apply in 1,000 gal. water/acre
Mixing Instructions:
When the hydraulic hydroseeder is one third full of water, slowly
add SCE-TAK and agitate into a uniform slurry.
Loading Sequence: Refer to the equipment manufacturer's additional loading sequence instructions.
Site Preparation: Grade preparation should divert water flow away for the face of the slope.
Characteristics: Anionic Linear Copolymer of Acrylamide Viscosity: 2,410 cps
Fish Toxicity: LC/50 Pimephales Promelas/96 hours> 100 mg/1
Storage: Maintain packaging integrity. Protect from mositure and high temperatures.
Handling: Slippery when wet. Clean up spills immediately.
Caution: Wash with soap and water after contact. Eye contact will cause irritation. Keep out of reach of children and keep away form open wounds.
Manufacturer: R&R Turf Supply, Inc.
P.O. Box 87
Ostrander, Ohio 43061
800-660-8789
Fax: 740-666-1539
www.landtack.com
|
